Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have macnotification traps enabled and originally I thought I was having a problem receiving the traps but using "show" I see that they are not even being generated because the counters are not being incremented. Any clue on what else I might need ...
We have one of our switches setup like this but we are not getting any traps from it. Is there something wrong?set snmp enableset snmp trap enable macnotificationset snmp trap 10.1.1.100 all port 162 owner CLI index 1set port security 1/1-2 disable a...
We are appearently not getting snmp traps and syslog messages on our server which is set as the destination for the traps.logging 10.1.1.100logging 10.1.1.200snmp-server host 10.1.1.100 version 2c engeccsnmp-server host 10.1.1.200 version 2c publicTh...
I am trying to set up dhcp snooping and was just wondering if the commands below are what I should be using for COS and IOS. Also, how would I do a test to see if the switch disables the port if it detects a DHCP server? I was thinking I could use IC...
Thanks. We will try upgrading to a newer version to see if it fixes the problem.While on the topic of traps, is there anyway you can have a switch (4000s, 4500s, and 6500s) send traps on things that aren't specificly in the config mode?
This is the output from the switch showing no changes in added and removed.ni_4k01_12> (enable) sh cam not countMAC addresses added = 0MAC addresses removed = 0MAC addresses added overflowed = 0MAC addresses removed overflowed = 0MAC address SNMP tra...
