Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,Having remote access vpn using vpn client 3.0 to pix 515 vpn in wild card and mode-config and a site to site vpn between the pix 515 and a branch office firewall.Now setting up RSA SecurID for two factor authentication.Current config has "timeo...
Hello,Wondering if setting up split tunnel for vpn clients using vpn client 3.0 to pix 515 using wild card mode-config can pose a security risk ?Regards...Ketan
Sync port of 2501 will support E1/T1Built in WAN port of 1601R will support 115 Kbps async and 2048 Kbps sync, will support T1/E12610 has one ethernet and 2 slots for WAN modules. Check the module installed :The WIC-1T / WIC-2T is the WAN module th...
DDR Backup using BRIs and the backup interface Commandhttp://www.cisco.com/warp/public/793/access_dial/britobribackup.htmlPermit only IP to cross over as interesting traffic in the access-listRegards...Ketan Chaudhari, CCSA, CCNP, MCSE
This can be easily achieved with commercial spread spectrum wireless as they can easily cover upto 35 Kms easily. I would recommend to use 5 nos. point to point radio links( 5 pairs ) in a star topology operating from the Central Office. Each link c...
A terrestrial wireless solution can be worked out for a fixed geographical area. If the area is indeterminate, then Inmarsat terminals maybe the option.Regards...Ketan Chaudhari
You obviously cannot use terrestrial microwave as it would need atleast 10 to 15 or even more repeaters, only option is using satellite communication.Regards.....Ketan Chaudhari, CCSA, CCNP, MCSE
