Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.I want to use encryption for guest access. In order to use the "RADIUS-NAC" in the WLC, you can not use or "Open + MAC" only "WPA + dot1". (Specification of the WLC) When the "Open + MAC", return from the ISE at the time of the "Web Authenticatio...
Hi, I want to question in relation to the command "authentication mac-move permit". This is either a recognized settings to allow the movement of the same switch, not a setting that allows you to move to other switches?(used Wired 802.1x.） When not a...
Dear sir.I am using Catalyst 6500 in the test.I wanted to examine details of the event, STP Debug was made Enable.>logging buffer debug>logging console debug>debug spanning-tree event ( or ALL )However, nothing is displayed.nothing also even in the b...
>Will Kuczmera
Thanks for Reply.
>Compatibility
Yes.
https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
・WLC5520:8.5.135
・AP185X:15.3(3)JF8（from WLC Deploy）
>AP Group
Yes.
The AP is participating in the...
Dear ganishh.iyerThank you.It was necessary to switch to SP.It tries this time.IP‐Packet and the point for the system to be downed by the usage are understood. (It is an example to the end. )Thank you for pointing it out though it knows the use of wr...
