About proteksa2006

proteksa2006 · 09-11-2008

Hello, My company buyed an ASA5510-sec-bun-k9 but when I do show ver I have this output : asa707-k8.bin I am very surprised, I have to use PAK ?or I have to upgrade the image?Licensed features for this platform: Ma...

proteksa2006 · 11-14-2007

the router 2801 swicht on, but no output from console portI can not access by any interfaceI think the only way to restore is via hardware (jumper)anyone could help me?thanks

proteksa2006 · 11-14-2007

Thanks for answerI think that an unknown console speed by a bad config-register.In 2600 & 3600 series there is a jumper to set the default console speed.On 2800 there is a similar jumper but with only two pings.reset memory and power conectors? I can...

proteksa2006 · 03-06-2007

HelloMedium size? How many telephones and Computer do you have?You could run a Cisco Callmanager Express with Unity Express on a 2800 or 3800 series.you could use 2970 switch series to create vlan.I hope this Could help you.Thanks

proteksa2006 · 03-06-2007

Hi,you could access via CLI and post the show running?you have to disable "guest mode" on the ssid.thanks

proteksa2006 · 02-21-2007

Helloyou are in rom monitor modetype this command:>o/r 0x2102(press enter)>i (press enter)the router must reload,This step causes the router to load the Cisco IOS software from the Flash with the configuration from NVRAM sorry for my english.if this...

proteksa2006 · 02-21-2007

COULD YOU POST RUNNING-CONFIG?HOW YOU CREATED THE DHCP POOL?THANKS

Member Since	‎02-21-2007 09:52 AM
Date Last Visited	‎08-26-2026 07:55 AM
Posts	7

User Statistics

User Activity

License ASA5510-sec-bun-k9 with a k8 image

2801 no output from console port

Re: 2801 no output from console port

Re: Cisco Digital PBX?

Re: SSID broadcast

Re: Problem with Cisco 2521: Cannot startup the router with norm

Re: Only five clients DHCP on a Cisco AP ?