Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Community,
Possibly this would be a very strange question since I couldn't find any information on how to do this.
I have a connection with a QSFP-4x10G cable that goes from a Cisco N56128P to the uplinks of a Cisco 2248P FEX. The situation...
Hi Guys,I was wondering if a Router 2911 could handle three Ethernet WAN links of 200Mbps each.Basically what I need is to handle 2 WAN links as Primary and 1 BackupThanks in advance,
Hello Guys,I have an ASA 5505 with two tunnels, one Site-to-Site (between two ASA 5505), and also I added a VPN for remote access using the Cisco VPN Cient. The thing that I discovered is that the connection Site-to-Site, I can reach hosts from the L...
Hello Guys,I have a Remote Access VPN between an ASA and a Windows PC, the issue that I'm seeing is that I can't transfer files between the ASA and my PC across the VPN.The first time I thought that because the size of the file and some issue with my...
Dear @Wes Austin,
Thanks a lot for this!. As you mentioned that is how I migrate from QSFP breakout to normal LC-LC fibers with FET SFP's.
I did the procedure one by one and the Port Channel was always up.
Cheers!