Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, My server group recently purchased a HP c7000 enclosure with 4 Cisco 3020 blade switches. Has anyone deal with this type of setup before? Any suggestions on how should I connect the 4 Cisco 3020 blade switches to my 2 Cisco 6513 Aggregation swi...
Hi,My company has 2 large sites with internet access and 2 small sites with NO internet access. All of the sites are connected via an MPLS cloud. I would like to inject the default routes from both large sites into the BGP MPLS cloud and configue the...
Hi,I have a quick question on failover design using two 5540 firewall running in active/standby mode. What is the Pros/Cons of using a crossover cablebetween the 2 firewalls VS using a dedicated vlan? I have two 6500 switches with a layer 2 trunk con...
Hi, I have a few questions on load balancing OUTGOING internet traffic through the ASA5540 firewall running code version 7.2. My company has 2 internet links going to the same ISP and the firewalls are running in active/standby mode. I would like ...
Hi, I am in the process of designing a Guest wireless network for one of our remote offices that would give our guests full access to the internet. The remote office ONLY has a single MLPS link to our corporate office. Internet access has to come ...
Thanks for the reply. I read those documents and they only refer to enclosures that have 2 blade switches. Since I have 4 blade switches and if I connect each blade switch to both 6513 switches, should I disable the internal cross-connect between swi...
There will not be that much Guest traffic and I can setup the Guest Vlan for redundancy only. I think creating two GRE tunnels with PBR will work.Thanks for everyone's input on this issue.
I was thinking about using GRE tunnels too. Since GRE tunnel is a point to point link. We have 2 MPLS routers in the head office and 2 routers in the remote office. Traffic are load balance between the 2 routers in each office. How do I configure GRE...
