Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi I have callmanager installed in one server (publisher) and I would like to install IPCC (for testing purposes) well I try to install IPCC in a new server and its asking me to enter the LDAP information? I dont have a AD or an LDAP configured, so h...
We had a problem with exchange few days ago where we had to rebuild exchange so when we did this apparently unity and exchange didnt sync correctly, anyways unity was working fine after the sync althought for some reason now if an outside pstn caller...
For some reason when we make an outbound international call the call suddendly drops...here is my debugs from the cisco 3845Aug 13 15:04:37.534: ISDN Se0/0/0:23 Q921: User TX -> SABMEp sapi=0 tei=0Aug 13 15:04:38.534: ISDN Se0/0/0:23 Q921: User TX ->...
We have callmanager 4.1 using a 2811 router but even thought we have the pattern [49]11 in call manager we cant reach 411..Is there a dial peer that i have to add in the 2811? if yes can you give me an example. Also we have already contacted telco in...
I have check the dial patterns and they all are ok. I have also check the dial pattern from the 2811 and they are ok.The users doesnt know if they are reaching our local 911 or their destinantion 911 office.Any suggestions and what it could be? or wh...
Ok so i can use the DC directory of the callmanager i am running cm 4.2.3, now is asking me for a user and password to the LDAP, will this be the same as the admin/psswd for the callmanager?, if not what user/password do i have to use to succesfully ...
Hi ginger,First of all thank you for your time, actually the unity_ourservername mailbox is active in our exch server. At this point unity is only able to notify us of a new voicemail by receiving an email from unity, but there is no MWI or LCD messa...
can i add the following peerdial-peer voice 411 potsdescription "911 CALLS"destination-pattern 411progress_ind alert enable 8direct-inward-dialport 0/0/0:23forward-digits allWill this work? considering that the route pattern at call manager is [49]11...
