Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hope someone here can helpI have a cisco831-k9 that worked previously. i was upgrading the dram when i got the following message; WARNING: Cookie information is corrupt message at bootup. i thought i might have a bad dram chip but the message conti...
I have 3 of these units that have no image and need an image loaded but they will request the file from the tftp server but wont recieve it. Any Clues to what could be going on? Thanks ahead of time
I have an AP that when i hold the mode button for 20-30 sec it will request the c1100-k9w7-tar.default file from my tftp server but will not load it. I have tried to reboot computer(maybe the tftp server has a problem: closed and restarted server did...
I have an AP that when i hold the mode button for 20-30 sec it will request the c1100-k9w7-tar.default file from my tftp server but will not load it. I have tried to reboot computer(maybe the tftp server has a problem: closed and restarted server di...
i have been told that the ids-4215 can only have a 4fe66(does that partnumber make sense). i have found that the pix4fe is interchangeable with a pix4fe66. is this true with the IDS? thanks Gary Lash chinsue32@cox.net
another update!!! i read somewhere that reinstalling the flash rom would solve this problem. but just made things worse. now the router wont even post after doing the tftpdnld -u command.can anyone shed some light on this.i just spent $80 on a bri...
update!!! i got the priv password. now i just need someone to get me the correct cookie settings for the cisco 831 router.this can be gotten by issueing the cookie command at rommon prompt.please post it here or email it to me. thanks
Rob, Thanks for the response.I tried your suggestion. But that has not solved my problem. I have other 1121's that the image recovery proceedure works with the Tftp server i have(Klever's Pumpkin TFTP). these units have come back from a customer ...
