07-09-2007 10:59 AM - edited 07-03-2021 02:19 PM
I have an AP that when i hold the mode button for 20-30 sec it will request the c1100-k9w7-tar.default file from my tftp server but will not load it. I have tried to reboot computer(maybe the tftp server has a problem: closed and restarted server didnt help.)
since the 1121g does not have a con port and no ios i cant see what the boot loader is doing. i do get leds. red-green-red, which indicates there is no valid image. so i come full circle again. wont load the ios from the tftp server. Is this bad flash? Oyea this unit worked before i sent it to a customer. did they do something to it?
07-09-2007 11:11 AM
Make sure the file size is not larger than 32mb. If it is then you need a tftp 32 mega or larger to support.
07-09-2007 11:40 AM
the file is only 4.5mb. the tftp server (Klever's Pumpkin tftp) is getting the request but the file is not getting to the AP.
Thought it was my tftp server but have been using it on other units all day.
07-09-2007 11:46 AM
Did the customer turn it into a light weight accesss point.
07-09-2007 11:49 AM
I dont think so. there doesnt seem to be any IOS on the AP at all. indicated by the RED-Green-Red LEDs.
07-09-2007 12:04 PM
I dont think so. there doesnt seem to be any IOS on the AP at all. indicated by the RED-Green-Red LEDs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide