Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey all,I have a wired set up, maybe you can help me to understand 2 things. I have 2 3750X in a stack.then I have 5 unmanaged switched connected to the stack.Each unmanaged switched has 2 ports to the 3750X Stack( one to switch 1 and one to switch 2...
T1 checkhi,i have 2 sites connected by 2 t1's through a converterROUTER<---->converter(RAD IMAXI-4)<--------->2T1's<------------>converter(RAD IMAXI-4)<---->ROUTERi seem like i am not getting 3MB bandwidth as i supposed to get.i want to make a steril...
hi,this: my configinterface MFR1 mtu 4470 no ip address no ip redirects no ip proxy-arp ip flow ingress ip flow egress encapsulation frame-relay IETF no ip route-cache cef ip route-cache flow no ip mroute-cache load-interval 30 no arp frame-relay fra...
HI,i have never configured QOS.currently we have T1 for Internet access for about 200 people.the second T1 is on the way (it is a 2XT1 bundle , waiting for a WIC to arrive to complete migration).Now i need to allow good Internet browsing experience f...
hi,i know how to upgrade ISO version.but this never happand to me yet and on the veb did not find answers.i have 2620XM:Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-I-M), Version 12.2(13)T5, RELEASE SOFTWARE (fc1)TAC S...
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_11_yj4/configuration/guide/lrescg/swmstp.html#wp1034497 did not find anything in rapid-STP compared to MST.also, I was trying to avoid touching hello or max age tim...
Well for STP problem solved with MST. spanning-tree mode mstspanning-tree mst configurationinstance 1 vlan 1-4094 spanning-tree mst 1 root primaryspanning-tree mst forward-time 6 This gets me to 17 seconds convergence time.can tweak more but 17 is go...
hi,i tried to use IPerf.and i am kind of lost.let say i have 2 PC's in MY LAN or i put 2 PC'a from each side of a T1, and i want to see what is the maximum bandwidth i have in each direction how should i config the iperf or Jperf to do TCP and UDP ch...
