I create a username on the ASA for the purpose of providing VPN access...username vpnuser1 password <removed> encrypted privilege 0username vpnuser1 attributes vpn-group-policy remoteaccess vpn-tunnel-protocol IPSec group-lock value remoteaccessNote ...

So I was trying to configure an ASA 5505 with both dynamic NAT for PC users to reach the internet and static NAT to reach servers behind the ASA. PC users work ok although they could not ping out which is odd.But the real problem is that I set up so...

Thinking about something and looking for a way to possibly do this.Currently, with the VPN 3000, you create the different groups and assign split tunnel lists and filters to that group. Then the client (remote user) is put into that group based on w...

I've been reading over the "Cisco Wireless LAN Controller Configuration Guide, Release 4.0".So it looks like once you have the HTTPS enabled and the management IP set, the majority of the configuration is through the GUI - clicking your way through a...

When configuring a crypto map configuration, I wanted a bit of a clarification on what exactly the match address command does.Which is it?A) Match address command is used to determine what traffic is "interesting" only when it comes to tunnel establi...