We are trying to convert a sup2/msfc2 from hybrid to native. However, we are getting trouble trying to format the 64mb card which we need because it's big enough to hold the ios. I'm pretty sure this flash was formatted on a native ios. Note that we ...
Is this a bug? It's affecting our monitoring system and ciscoworks. ny60wa06zdr01#show moduleMod Ports Card Type Model Serial No.--- ----- -------------------------------------- ------------------ -----------...
I have a strange problem. We have nat setup on our gig 0/0 interface. You would think that it wouldn't create an arp entry for the natted I.P since its being done inside. However, it seems that for some reason, the nat I.P we are using is being adver...
Cisco:We upgraded one of our layer 3 switch.Dual sup slot 5 and 6. Basically, we upgraded the IOS by copying the IOS to sup-bootflash and changing the boot param. My question is, is there anything special we have to do to get the standby sup or does ...
Maybe if we can find a native IOS that's less then 24 mb so we can use that to convert from hybrid to native. After that, we can then possibly format the 64mb card and upgrade the IOS? Does anyone know the smallest native IOS we can use?
What we have looks fine unless you see something.ny60wa06zdr01#show run | inc aaa aaa new-modelaaa authentication login default group tacacs+ enableaaa authentication login console group tacacs+ enableaaa authentication login async noneaaa authen...
