About darkbeatzz

darkbeatzz · 07-21-2009

Guys,is this possible to do? If I want to have groups of vlans to have their own routing tables preventing the groups to route between eachother and push them to a default gateway of a firewall. if so do you need any special hardware or software? ...

darkbeatzz · 04-15-2009

Hi All,What is the application you can use for managing multiple asa firwall rule bases?thanks

darkbeatzz · 04-14-2009

HiI have Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(1c)trying to do and ISDN test call and get the following erro01:46:14: ISDN BR0/1/0 **ERROR**: host_disconnect_ack: Unfound B-channel on Disconnect_Ack call id 0x800501:46:36: ...

darkbeatzz · 04-10-2009

Hi, I have a site-to-site VPN from a remote office to a HQ site. At the remote site I have an ISR 877 ADSL router(zone based firewall) and a PIX 523 (7.2) at the HQ site. The problem is I can ping and connect to anything in the HQ site. But I can onl...

darkbeatzz · 04-10-2009

Hi, Appologies - Posted in wrong section. Have reposted in firwalling section.I have a site-to-site VPN from a remote office to a HQ site. At the remote site I have an ISR 877 ADSL router(zone based firewall) and a PIX 523 (7.2) at the HQ site. The ...

darkbeatzz · 07-24-2009

Thanks Giuseppe helpful as always!

darkbeatzz · 06-04-2009

Hi Paul,I would not compare them to IOS firewalls.I have worked on them and to be honest dont like them at all. Would recommend to people to get an asa 5505 instead.have a read of thishttp://www.cisco.com/en/US/products/sw/secursw/ps1018/products_te...

darkbeatzz · 05-27-2009

You can have servers in your network with a public IP from your range but they would be patched directly to your outside switch

darkbeatzz · 05-26-2009

use Capture.Its a fantastic new tool introduced in 7.0basically you create and aclcapture the aclsh captureASA Capture Feature The administrator needs to create an access-list that defines what traffic the ASA needs to capture. After the access-list ...

darkbeatzz · 05-22-2009

the solution to your problem is to use checkpoint :-)

Member Since	‎06-01-2007 06:54 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	90

User Statistics

User Activity

Multiple Routing Tables - Sup 720

Easy asa management question

ISDN Error message - Can anyone help

ISR 877 to PIX 525 VPN RDP issue

ISR 877 to PIX 525 VPN RDP issue

Re: Multiple Routing Tables - Sup 720

Re: Zone Based Firewall and QoS policies

Re: DMZ public IP?

Re: Debug in PIX

Re: ASA - Translate Destination IP only?