About ZlatkoBN1

ZlatkoBN1 · 11-01-2009

Hi all,I tried to solve problem with fragmentation and configured parameters as below. The same is on the router on the other side. interface Tunnel0 ip mtu 1438 tunnel path-mtu-discovery ...I configured GRE over IPSEC (transport mode), and problem i...

ZlatkoBN1 · 04-19-2008

Hi, When I am calling to numbers which is to be reached accross H.323 Voice Gateway (1751-V, c1700-ipvoice-mz.123-7.XR3.bin) all is OK. But, incoming call on that gateway can be placed only one time after making outgoing call on that gateway.IP phone...

ZlatkoBN1 · 06-08-2007

I have connection (leased line - 1 Mbps) between two routers (3745 and 3620). On both sides of serial interfaces there are compress stac command. I think that compression (software compression) should be turned off because one router (3620) have high...

ZlatkoBN1 · 10-28-2009

Hi,I had same problem today. Switch C4506-E with version 12.2(52)SG reloaded without any reason and I saw same in show version as you. He has worked corectly for about 6 months.

ZlatkoBN1 · 09-20-2008

After upgrading IOS problem is solved. Thanks

ZlatkoBN1 · 06-08-2007

I can try using predictor compression, but I want to turn off compression on routers. Commpression is not necessary at all. That's problem. It looks like link don't work without commpression. Very strange.

Member Since	‎06-08-2007 04:18 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	6

User Statistics

User Activity

PMTUD is broken

Incoming call only after outgoing call?

Compression Problem

Re: 4506 Switch reloads

Re: Incoming call only after outgoing call?

Re: Compression Problem