Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Experts,I am getting following error on my 2801 series router :Traceback= 0x610D4A3C 0x6112DCEC 0x6112DCBC 0x6113088C 0x61113FB8 0x611323B0 0x6232A218 0x6232A1FCloadIOS version is 12.3(14)YT1.image is c2801-adventerprisek9-mz.123-14.YT1.binCan any...
Hi Experts,I have two internet connections from two different SPs. and they have assigned address block from their pool. I am using SP-B for back up and SP-A as a primary one. I want to use NAT but the problem is when link towards SP-A goes down SP-B...
Hi All,A very basic question.I know ospf dont generate a defualt route unless we specify the deault information originate command. I would like to know the reason behind such behaviour. Though I have a default route and redistribute static routes to ...
Hi,Can any one help me to understand TURBO ACLs?I have the fundamental clear about it such as:-The configured access lists are maintian in a sequencial order and the look up time and CPU recuired is reduced.But i need to know exactly how it works and...
Hi,AFAIK the 224.0.1.40 is a reserved multicast group for cisco's Rp descovery. All cisco routers are members of this grup by default and listen to this group for Cisco RP discovery messages advertised by mapping agent even if it is not configured.I ...
yes you can translate VLAN number.But information provided by you is limited.Hope you get help from this link:http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/vlans.html#wp1044990HTH,regards,shri!!!
Hi Michael,This link will be helpful to understand the commands:http://www.cisco.com/en/US/docs/ios/12_3t/ip_route/command/reference/ip2_i1gt.html#wp1108310And this link would be good for technology:http://www.cisco.com/en/US/tech/tk365/technologies_...
Hi Michael,As per my knowledge both methods are correct!!!! the only thing is when you use message-digest-key you are doing MD5 authentication, where as when you are using simple suthentication-key clear text authentication is taking place.Lets hear ...