I am using CISCO 1811, and have some users connects via cisco remote-vpn-client. the problem is i am unable to restrict them. even though i have blocked there access to only single host, but they are able to access other VLAN .ip access-list extende...

dear all, i want to establish site to site vpn but both sites are using same IP network, so i have to overlap this. i did configuration but when i try to ping it gets time out. after running commands on router i found out that remote netowrk (vpn) tr...

dear all, i have two internet links (dsl), having 1 cisco 1811 router, both of these are on (dedicated 8 port ) switch and a link to router (fa0). fa1 to lan . i want to setup load balancing (80%-link1 , 40% of link 2), and in case of failure of link...

i have cisco 1811 router and two ISP links (DSL 1Mb, 512Kbps). i want to load balance between these two, if one goes down load shifts to secondary link, any idea to do thisthanks,

dear all,site 2 site vpn configued on 1811, crypto map policy with md5 hasing is configured, i want to configure it as remote vpn also. is it possible to configure both on single interface . i heard that remote vpn only supports SHA algo. do i have t...