We have both 1130 and 3500 AP's under the control of a 5508 controller. I have heard that channel "b" can slow down the other AP channels when in the same vicinity. We have 1130 with channels a/b and 3500 with channels b/g/n.  If this in fact does sl...

Here is the setup. We have a series of 3560 switches acting as layer 3 devices. The campus is subnetted based on location and application. For instance, one building would be say, 10.13.x.x. The interfaces on the switches are configured for either da...

                   We seem to be having a few issues with our 3500i AP's. Over the past few months we have had to get a RMA on three separate occasions. The first time, the AP had been in service for a few days before the AP froze with the bright whi...

We have a 3750 and a 3560 defined as a layer 2 switches. One gig port on each switch  is trunked to layer 3 switches, which containall the VLAN definitions etc. The other gig port on the 3650 and 3750 switches are trunked together to provide an alter...

We have two 4404's and WCS. The 4404's are almost maxed out. We have an addition 4404 which we would like to add to the group of 4404's. What is the best way to do this?Thanks