Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Can we set up a policy route to send web/ftp traffic to one interface, and all other traffic to a different interface?We will also need to nat the web/ftp traffic.Any help would be greatly appreciated.Thanks,Brian
We're trying to set up a vpn tunnel between a host site and a remote. The host site has a different router/connection that act as the default gateway and connection to the corporate host and internet. We have a seperate connection with a pix 501 on i...
We're getting IMA t1's hauled to us over DS3, then through our DACS. We'd like to take one ds3 out of the DACS into a cisco with the IMA T1's on it. Is there a card that will do this?
We are trying to prevent people from logging into our dial in servers multiple times with just one account.Haven't had any luck finding references on this.
We have a router acting as a VPN box. It does not do NAT, there is another router doing that. I had connections working with the Cisco VPN client 3.x, but after I setup PPTP on it, connections with the Cisco client do not work. A connection is made, ...
I see how it is set up for source address routing, but what about destination port routing. All the documentation seems to talk about it address matching. Can we do destination port matching for policy based routing?
I can't get to that link, but what we're after is a channelized DS3 port that will do IMA. Not an ATM DS3 port, but a regular, channelized DS3 port that each channel can be an IMA DS1.
