About labredes1

labredes1 · 05-20-2008

Hi, i have a cisco 7204vxr router (c7200-is-mz.123-6f.bin)and on one of the networks (wich is a nat) there are sip clients connected to a sip server on another network. What is happening is that the router is acting as a ALG/SBC changing the sip/spd ...

labredes1 · 05-17-2008

Hi,i have a cisco 7204vxr router (c7200-is-mz.123-6f.bin)and on one of the networks (wich is a nat) there are sip clients connected to a sip server on another network. What is happening is that the router is acting as a ALG/SBC changing the sip/spd i...

labredes1 · 05-17-2008

Hi,i have a cisco 7204vxr router (c7200-is-mz.123-6f.bin)and on one of the networks (wich is a nat) there are sip clients connected to a sip server on another network. What is happening is that the router is acting as a ALG/SBC changing the sip/spd i...

labredes1 · 10-29-2007

Hi,Here we have a CCM v5 connected to a MGCP Gateway, cisco 2811, we have it all configured, we think so... the gateway is connected to a PBX.But when debug mgcp packets is on we get this error message.Oct 29 16:37:06.739: MGCP Packet received from 1...

labredes1 · 10-25-2007

Hi,I currently have the following scenario. AVoIP network based on the CCM5.x and Cisco SCCP Phones, a Cisco 2811 working has a gateway. The gateway is connected to the PABX via BRI. The Phone numbers on the VoIP phones are 3.... and the phone number...

labredes1 · 05-23-2008

Thaks for your help, but the solution to my problem was as simples asno ip nat service sip udp port 5060Anyway,thanks for your help

labredes1 · 05-23-2008

Thanks a lot. It really solved my issue. I have reallly never thouht about issuing that command since it does not appear in the rounning conf.Thanks for your help,AndrÃ© santos

labredes1 · 11-05-2007

Hi,I think that our problem might be that the PABX is rejecting our calls... Do I need to make specific configurations in the PABX to accept the Bri Backhaul configuration?AndrÃ© Santos

labredes1 · 10-26-2007

Hi,Currently I have the situation that you can see of the picture. I can only make calls inside the voip. I can't make call between the PABX and the Voip. The only thing i have accomplished so far is to register the MGCP gateway with the call manager...

labredes1 · 10-24-2007

Hi again,that was the problem...I realy had to have the host name instead of the ip address of the gateway,although i thought it be better to use IP.Thanks a lot all of youAndrÃ© Santos

Member Since	‎09-20-2007 09:01 AM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	16

User Statistics

User Activity

SIP/NAT/ALG 7200

NAT/ALG/SIP Router 7204vxr

Cisco 7204VXR ALG NAT

failed-Incoming-Outgoing call collision in MGCP gateway

Dial Plan VoIP and POTS

Re: NAT/ALG/SIP Router 7204vxr

Re: Cisco 7204VXR ALG NAT

Re: failed-Incoming-Outgoing call collision in MGCP gateway

Re: Dial Plan VoIP and POTS

Re: MGCP CCM 5.x Router2811 NOT REGESTERING