About suguilian

suguilian · 12-18-2005

Hi to all,We are designing an IBNS system, one requirement is that we want to tie one usera specific PC(identified by MAC or certificate), as a result, that user can only logon to the network with that PC. Is it possible to achieve this in ACS?As a a...

suguilian · 01-23-2003

the inside interface is 'line protocol up'. And it is ok for IP addressing. The pix(v6.2) receives no reponse from other host when it pings, hosts receive no response from the pix when it pings either. And the pix can learn the mac of the host after ...

suguilian · 12-27-2005

You can use "dot1x max-req" under the interface to control how many times the suppliant can try to communicate with RADIUS server.

suguilian · 10-12-2004

you can use one VPN to achieve this. Since ISP's PEs connecting to you run the same routing protocol with you, so you can ask your ISP to modify the metric for your HQ network (2.2.2.0/24)on the PEs which connects to your spokes.

suguilian · 05-27-2003

Please be noticed of the following output"2d13h: AAA/AUTHEN (159376357): password incorrect " . make sure to use the correct username/password.

suguilian · 01-23-2003

Hi Brett, thanks for your reply. I have tried all of these . but it seems not working. The problem is that the switch which the pix connects to does not learn the MAC of the pix. Is it possible that the Ether interface has some hardware problem?Regar...

Member Since	‎12-26-2001 01:40 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	8

User Statistics

User Activity

ACS deployment in IBNS

pix can't ping any other host, it can't be pinged by any other host either

Re: 802.1X - configuring authentication attempts

Re: Redundancy AND loadsharing with two HQ sites

Re: verify failed when connect ( modem remote access : ppp ) to

Re: pix can't ping any other host, it can't be pinged by any oth