Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
What is the best way for me to connect my VOIP network to an existing Nortel Norstar Modular ICS 4.0 I have a 3700 with 2 FXO and 2 FXS ports. My pbx has a E&M trunk module installed. Where do I connect to on the PBX side (are there pinouts), and doe...
Open a CLI session on your controller and type the following to see if you have an error on your trustpoint used for AP joins.sh wireless config validation statusIf you need to rebuild your trust point, !Make sure your WLC is namedhostname YourWLCNam...
@Mark Elsen I agree, but He didn't post the relevant info to understand what the primary and secondary images on the AP are, so with my suggestion its easy enough to try to see if part 1 contains a compatible image. I've also seen some cases where t...
You have no trustpoint associated with the Wireless Managment interface, this is required for AP joins.. so I would assume no Ap's are joined to this WLC? If true the following script will create the trustpont and assign to the Wireless managment int...
