Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Folks,I have a terrestrial wireless system which uses the line of sight configuration. But the tower which transmits to me is far away (27 Km), due to this distance I am finding a troubles in doing the alignment and positioning the antenna.Is ther...
Hi Folks,On Page 173, Jhonathan chin Book (Frame-Relay Solution Guide), there is example called "Monitoring and Verifying Frame-relay Traffic shaping on Switched PVC)I used NetIQ Chariot version 5.0, to send stream traffic with the following script c...
Greeting every oneI have installed the PIX-4FE-66 card in the first slot of PIX-525 but it’s is not working, whenever I put the command “nameif ethernet4 perimeter1 sec50” the pix start saying unrecognized hardware.Any comment please.Here is a partia...
Greeting every one,I am trying to configure the PIX 525 loaded with version 5.3(1) to achieve load balancing from Two ISPs, it's like I want both ISPs to forward the traffic simultaneously to the Pix firewall, the bandwidth of each link is 64Kbps. ...
We are about to deploy IDS 4215. As we saw in the IDS presentation, the IDS will detect hacking attempts after that it will add a rule in the firewall to restrict it from further access.Fine, this is valid if we are deploying Cisco Pix Firewall, unfo...
It will be great if you reached a solution with this, please refer to the thread "Load Balance from two ISPs into single PIX Firewall".Regards,Ismail Alshelh
Wow, this is will save lots of money, I have proposed two content switching earlier to one of my customers so that he can activate both of the PIX firewalls at the same time, each box cost was not less than 15000$.Ismail Al-Shelh
Exactly, Its like how the Pix will forward to two Virtual IP addresses?I did not reply soon cause to be honest I do not have a PIX firewall to try Multiple HSRPs, anyways while I was driving to the customer I was wondering like how the pix will route...
