Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've been seeing a number of different bandwidth calculators that are very helpful to determine if you have enough bandwidth per call.My question is very basic. Are these calculators talking about one-way calls? Do I not have to multiply them by two ...
I have a PIX 501 with a server on the inside that is accessible from the outside with the routable IPonly, using the static command;static (inside,outside) <outside IP> 192.168.0.101 netmask 255.255.255.255 0 0There are inside users that also need to...
I have a 827 ADSL router with the ethernet port.I would like to know if I can set it full duplex. I can't seem to find the proper command that works.Thanks.
I have a scenario whereby I'm using a router based VPN to terminate my site-to-site tunnels and my T1 connection. I have a 3rd party partnernet that I need to connect to, and they have provided me with their own hardware to connect. I would like to c...
Oops, I'm sorry but by closer look of the document my scenario is the same DNS doctoring.Only difference is that there really is no name resolution in my case. It's accessed directly by the IP address.
Hi,Do I need to have another interface for this to work?I see that the pages describe the scenario that I have, which is the destination nat where both the server and the internal resources are on the same inside interface.The only difference is that...
