Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
i got the business need that some users need an anyconnect session to another customer at the same time and this should be achieved with a terminal server.
So lets say User1 and User2 are connected to a terminal server at the same time.On thi...
Hi,
i want to upgrade several device via Prime.The device itself got 64MB space and the new image has about 52MB
After performing the image distribution Task via Prime and enabling the "erase flash" option (which hopefully deletes only unnecessary ...
Hey guys,
I am Using PI 3.1.0 and would need a report to inform me about the latest configuration changes on any devices.
I can compare in the menu "Configuration / Network / Network Devices" the current configuration of any device but i would like ...
I got a Fileserver which is directly attached to a Nexus 5k.Since there is a pretty high load on the server i want to know who is causing all this?
One possibilty would be the Ethanalyzer but since this is like a wireshark capture the information wou...
Hi, as already mentioned no you can't do that and this also doesn't make any sense.What you can also do is changing the AD if needed but thats only locally significant
Just upgraded two 3850 Stacks this week for a customer from 3.6.6E to 16.9.4 which took about 15 Minutes. software install file ..... switch .... verbose new force Also i faced the issue that local users with a secret 4 password were removed after th...
You do have Users like admin, bhott and so on configured as network-admin which means you have read/write access via snmp.priv means that you have encryption and authentication enabled. But you need to know the credentials in order to use snmp access...
Hi,
unfortunately you aren't able to see since when the interface is up.Via "show int ..." you can see how many packets, errors etc were received on the interface since the last time these counters were cleared.For troubleshooting purpose you can ma...
