Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Running FW 2.1.5 and when calling inbound over SIP trunk and call is transferred to VM, the greeting played is garbled. Issue also with FW 2.1.4.A similar issue exists per post https://supportforums.cisco.com/thread/2128159 however NAT Keepalive has ...
Just wondering if it is possible to not have the entire UC320 reset for simple changes to take effect. Seems like even a name change or vm password reset will result in UC320 to restart and one will lose wireless / data connectivity on their PCs.Also...
We have an outbound dialer sip option configured for Progressive only to just play a wav file to the called number. It is integrated with CVP 8.0(1) We want to restrict number of simultaneous outbound calls to use only 4 B-channels hence we have 4 p...
If we specify to use Widnows Credentials shouldn't photos work if there is authentication setup? EDI 1 True sAMAccountName http://priweb03/MOSSMGMT/Staff/sAMAccountName.jpg ipPhone
The ITSP reset the trunk during troubleshooting it was taking a longer time for the UC320 re-register and they asked if I could lower the timer. On that note, may be a way on UC320 to reset just the trunk other than rebooting the whole box.
Glad to see p-time parameters included in SIP settings beginning with FW release 2.2 (which has been currently pulled due to other bugs) so no need for PMF. Are there any plans to add registration timer parameter which can be changed?
UC320 by default uses RTP p-time of 30 ms which was causing jitter when listening to voicemail greeting over SIP trunk. Used the MitTel PMF file that changed it to 20 ms which worked for Prodosec SIP trunk in Canada.
