About kwanm63

kwanm63 · 12-06-2007

If I have one access 6509 switch connected to 2 core 6509 switch as follows.. Switch a - dual 10g sup.. slot 5 -- Active slot 6 - Hot Slot 5, supA-connected to core 1 Slot 6 , sup B- connected to core 2. Running MST spanning tree Since slot 5 is acti...

kwanm63 · 12-06-2007

If I have one access 6509 switch connected to 2 core 6509 switch as follows..Switch a - dual 10g sup..slot 5 -- Activeslot 6 - Hot Slot 5, supA-connected to core 1Slot 6 , sup B- connected to core 2.Running MST spanning tree Since slot 5 is active, ...

kwanm63 · 12-18-2006

On a cataylst 4507, running cat4000-i9k91s-mz.122-20 code, how can i enable the port updown message when a device join or leave a port ?on a 6509 sup 720 , I enabledlogging event link-status defaultbut their is no similar command on a 4507.current lo...

kwanm63 · 07-14-2003

I'm trying to created a cable so I can start a lab for 3 cisco router. They all have integrated dsu/csu installed. I once found a link to created a rj-45 cable to accomplish this but can't find it again. Can anybody help ?thanks allM

kwanm63 · 10-22-2002

Hi has anybody seen a configuration like this ?router eigrp 1network 10.128.0.0 0.0.0.15or router ospf 1network 10.128.0.0 0.0.0.15 area 0what exactly does 0.0.0.15 do and is their a link on the website to explain it more.thanks

kwanm63 · 03-08-2011

My issue is not between the 10gig X2 connector to the 5K using the SFP with a regular fiber cable. It's when I make the connection using a SFP-H10GB-CU3M cable. These cables look a bit like coxial cabling and they come with LC connectors on both end...

kwanm63 · 10-20-2010

unfortunally, I'm learning that defalt route via ospf so it will have to be a redistribute option. Luckily, it 's only 2 routes so filtering is an option.. However, if I had more routes , I can imagine how annoying it can be. But believe it or not,...

kwanm63 · 10-20-2010

sorry MIke, Let's me just ask this for now.. I'm really more of a routing /switching guy so I'm usually thinking from that perspective.Is there a way to write a default route only acl in a ASA ? In a router you can just do an acl or prefix-list to a...

kwanm63 · 10-20-2010

sounds like 2 things ?1) you have to redistribute the 'ENTIRE' protocol in a ASA....2) that's not how you write a 'default route' only ACL unlike a router ACL...

kwanm63 · 12-07-2007

I think what you are implying is that unless I manually flip the secondary sup to make it active, there is no automatic redundancy.

Member Since	‎10-22-2002 01:47 PM
Date Last Visited	‎08-18-2017 03:56 AM
Posts	18
Total Helpful Votes Received	4

User Statistics

User Activity

active and hot 10g supervisor module behavior

active and hot 10gig supervisor module and uplinks

%LINEPROTO-5-UPDOWN -4507 message

back to back router lab via integrated dsu/csu port

eigrp or ospf advertising network configuration question

Re: Nexus 5k connection to a 6513 with a SFP-H10GB-CU3M cable

Re: ASA default route ACL and default route redistributing/defau

Re: ASA default route ACL and default route redistributing/defau

Re: ASA default route ACL and default route redistributing/defau

Re: active and hot 10g supervisor module behavior