Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've been trying and trying and trying to get Anyconnect setup on our network without avail. The client is not getting an IP address at all however if I use a local pool, the client gets an IP address.ASA Version: 8.4(1)Here are excerpts from my conf...
Greetings.I've configured an L2L connection between our 5505 and 5510 but it won't come up after configuration and trying to ping.I have attached both configurations. Did I miss something?
Greetings.Our network setup looks like the following:-ASA 5510 --->> E0/1 (1841 ISR) E0/0 --->> VLANS / Catalyst SwitchWe've recently added ASAs to our network. Our intention is to setup a VPN tunnel to our branch office. The head office setup shown ...
Greetings.Our network setup looks like this:ASA 5510 --->> E0/1 (1841 ISR) E0/0 --->> Catalyst SwitchWe've recently added an ASA 5510 to the network to replace the old hardware firewall. We have multiple VLANs setup on E0/0 of the 1841. I've attempte...
Greetings.I have a problem. We're planning to add an ASA into our network for VPN and firewall purposes. I've hooked the ASA up to the network and so things look a bit like this:-Bridged Internet Connection --->> ASA 5510 --->> 1841 Router --->> Netw...
-Marcin,I was also pinging from a machine that sits behind the 5505.I tried the command that you gave me by the tunnel still refuses to come up. Nothing in the logs or from the debug. Weird.I'll get a TAC case open and post the case no. here ...
Sure. I'll do that. No problem at all.I just did a reconfiguration of the tunnels and here's the log after doing that.Edit: Too condensed. I'll re-post it for more space.
Thanks a lot for your help so far.I'm just a stumped. If I get nowhere with it by the end of the day, I'll get a TAC case opened and see if they can help me resolve it.Once again, I really appreciate your help on the matter.
