Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello there,I'm facing an issue with MyDevices portal. The BYOD On-Boarding registration works pretty good, and the users get access to the network as they have to do.However, when the user accesses the MyDevices portal, some registered devices (whic...
Hi everone,Scenário:I've deployed two Cisco ISE 1.1.2 nodes as follows:Node 1 as Primrary Admin, Policy Server and MonitoringNode 2 as Secondary Admin, Policy Server and MonitoringAll configured roles works as expected.Problem:Once I promote the Node...
Background:Deployed a Cisco ISE 1.1.2. that is used to authenticate and posture validate for wired users, attached to Cisco IP Phones. Backend database is Microsoft AD.Problem:At the first time both, users and IP Phones, pass authentication and postu...
I've configured my SSL VPN to certificate authentication, in wich the authentication with certificates is working fine. However the ASA is not able to store (cache) the CRL.Based on debug bellow the asa downloads the CRL file but is not able to open ...
Hello Guys,I've upgraded a 6509 switches wich are running in VSS, from IOS 12.2 (33)SHI1 to 12.2 (33)SHI5. After that I'm facing the folowing log messages periodically.------------001867: Feb 15 2011 09:21:52.097 GMT-2: %HA_EM-6-LOG: Mandatory.go_un...
Hello robertbrink1,I open a TAC, and during the troubleshoot, we have identified that the bihavior is the same as mantioned in this bug.The fix is in patch 4 for ISE 1.3 and ISE release 1.4 has this bug fixed too.Thank you man!
robertbrink1,I've tried to reproduce the problem in my lab environment, however every thing have worked perfectely. So I'm guessing if this issue is not regarding the ISE implemented in a Distributed Deployment. Because the real implementation I'm wo...
Hello robertbrink1,In my case, the username is not in upper case in AD. But the mapped user's group is.I'll try to validate it in my lab. Thanks a lot.
Hello guys,The as I metioned before. The I've got the enviromment working fine by enabling only "User Authentication" and "Single Sing On" as showed in picture I sent before.Thanks every one for helping me.Paulo Magalhães*Please rate helpful posts*
Hello guys,I've got the problem solved.Both nodes are in diferent location and they are behind a firewall in each location.The problem was a wrong NAT statement on firewall in which the node 2 resides behind to. This NAT was preventing Node 2 to inic...
