Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have a pair of ASA 5550 running in active\standby with software ver 8.3. I want to convert my ASAs from single to multiple context mode, but I was wondering how active\standby is configured in this mode. The system context does not allow any IP ...
Hi all,I have a question with regard to L2 and L3 throughput capacity. Let's say I have a 3750G which has 32 Gbps switching fabric. Does this mean 32 Gbps at L2 only or L3 as well? For example, I have 20 SVIs configured on the switch (as opposed to r...
I'm using CME 3.4 on 2801 with IPVOICE IOS and Cisco 7940 phone. I'm trying to configure VOIP dial peers so that when any number starting with 9 (9 being an example) is dialled the call is routed to my VOIP provider's SIP proxy. If anyone can provide...
I think you would be better off with what Lei suggested earlier, and that is to run an IGP on top of your VPN tunnels, or re configure your BGP to advertise your LAN subnets over the VPN instead. This way you do not have to rely on the crypto maps to...
OK, I just got off the phone with Cisco. Adv IP Services is compatible with CME3.4 however you can't use SIP. SIP is only fully supported with IP Voice and IP Voice/Video IOS.
Hi guys, thanks for your help and thanks for the config, that will be very helpful once I figure out why I do not have the "voice register global" command. I know that IP Voice IOS works but the problem is that it does not have a firewall, which I ne...
