Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Salman,We are in the process of Dual Stacking our network. However we have struck an problem with IOS on the 6500 Supervisor 32 (PISA).Cisco Flagship Catalyst Family seems to lack IPv6 functionality for Campus networking.We have 4 x 6500 Superv...
Question:- Currently we have NAC Appliances 1xCAM-2xCAS's, no problems works fine. Software is v4.0.5.We purchased another NAC Appliance to use as the CAM as the current CAM will be lost during a "business carve out". The new NAC has version V4.1.2....
Scenerio:- GRE Tunnel configured from points "A" to point "E" and works fine.Between "A-B" "B-C" "C-D" "D-E" there are no QOS mechanism's. Links vary from 10mb/100mb/Gigabit.Question:If on the GRE Tunnel you place traffic shaping of say 5mb, does thi...
Scenerio:-Both locations have Multi Layer Switches. Location "A" -> 100mb FastEthernet, "no switchport", Layer 3 interface, with IP address configured /30 subnet mask. Location "B"-> 100mb FastEthernet Layer 2 interface, "switchport vlan 10" with VLA...
Scenerio:- A 2821 with HWIC-1GE-SFP module(G0/1). A 3560(WS-C3560G-48TS-E) with (SFP) fibre between the two devices. On the 3560 (G0/49)receiving lots of "pause frames". On the 2821 lots of "pause outputs" on the Gig0/1 interface. No other errors on...
Phillip/Salman,Thank you both for your feedback, comments and assistance. It is very much appreciated.I have approached our Cisco Account team to take up the challenge.Greg
Salman,Thanks for the reply, it is very much appreciated.I have also seen the PISA is EOL/EOS, with the last engineering code September2011. Do you know if/when an new IOS will come available for the PISA which may include the IPv6 features mentioned...
Thanks for that.The idea is to limit an customers access to 5mb via the tunnel. But, what effect is there on the tunnel traffic, if between routers C and D there is traffic shaping policy(called "traffic"). How can the tunnel guarentee 5mb if it is n...
Thanks, confirms what I thought. So on the SVI side (Vlan10), you have spanning-tree by default(But, there is only one port in the instance). So with BPDU's and associated timers this can be an restraint? With "Switchport" configured you use "process...
