Hi if somebody is able to sanity check the following QoS config thanks.My goal is to guarantee 180Kb of bandwidth for voice across each of 2Mb/s WAN links.The policy maps would be applied outbound on the CPE WAN interfaces, and the AR edge sub-interf...
Can you port forward inbound ICMP connections on an ASA firewall?There doesn't appear to be the option to do this. Only tcp or udpfw1(config)# static (INSIDE,OUTSIDE) ?configure mode commands/options: Hostname or A.B.C.D Global or mapped address i...
I'm having some problems trying to get tacacs authentication/ authorization working with my Nexus 5010 version 4.1(3)N2(1)Would someone mind sanity checking my config? I've included the logs from the nexus, and the logs from the tacacs server. The ...
HelloI'm looking to purchase a used Cisco 877w off ebay for home.I have no real basis to be suspicous(~$270USD seems a fair price), but are there any obvious questions I could ask to check if it is genunine Cisco, and not counterfeit?TIA
Hi allImmediately after a reload of our 6509e switch, it appears that DCEF has disabled on one of the Gig module daughter card's because of a malloc failure due to memory fragmentation.Apr 1 02:23:45.296 xxST: %BGP-5-ADJCHANGE: neighbor x.x.65.28 Up...
I guess I'm just being cautious. There have been several stories on /. over the past few years regarding counterfeit, or unauthentic Cisco gear inc routers. You also hear *stories* about this stuff floating about in the greyware market etc.Thanks f...
Thanks for that.I take it there is no way just to enable DCEF only on the line card?Will re-enabling DCEF globally flush and rebuild the tables for the entire switch, or just the line card that DCEF is currently not runnning on?It would be good to kn...
Never really resolved this. The ping tests I originally did were from a laptop running Ubuntu. I got completely different results when running the same tests from a laptop running windows hosts. Basically no packet loss no mater what the packet si...
Very timely thread. I was having the exact same issue with radius(freeradius) trying to auth IKE, when I only wanted user authentication by radius.I've applied the changes suggested, and it's fixed my problem also. Thanks =)## OLDaaa authentication ...
Is this with the interface 'tag-switching ip', or 'mpls mtu' command? I have already tried the mpls mtu command set on the PoP 7204VXR, but it made no difference. 9126 seems to be the default on the 6509e's in our main centerCurrentlyPoP 7204VXR to...
