Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have one VLAN on a 3750 where I do not see any MAC addresses even though it is in use. This is an unrouted VLAN between a WLC on a port-channel/LAG and an access port to an ASA for guest traffic. When I do a show MAC add I get nothing for VLAN 60...
I have not found anything but today ran into something I haven't seen before. I had phones setup in the 200-245 range that were working fine and then placed some analog FXS ports from 255-258 as fax ports. I could not get them to ring, they rang bu...
I am being asked if there is an automatic method to add a 9 to the missed call number for users to return calls by just pressing 'dial' from the history. I know we can hit the edit and add the 9 there but I have been asked if this could be done with...
I have a customer who has recently converted to a UC560 and SPA509G phones from an old Norstar. One feature on the Norstar was that if you called an internal extension and they were already on a call there would be an indication on your display that...
I have some users getting new laptops that thave a Dell DW1501 half card adapter that is giving me problems connecting to the wireless. Runnning 7.0.116 on the WLC and 1252 APs. Using WPA2-PSK and the clients show they are associated and authentica...
My point exactly an extra step. IMHO I'd like it to be displayed in the show vlan to keep it all together. Still not understanding why the MAC table is empty...
Yes it is there and active. 60 GuestWirelessDMZ active Gi2/0/1, Gi2/0/43 I wish the port-channels showed up in the show vlan. If there any tuning (by allowed or pruning) of vlans it slows troubleshooting compared to other vendo...
What I hope isn't missed is that while what David suggests will allow for external paging , the original question was about simultaneously paging internal and external. That function I still have not found a solution for within the UC500. The one p...
No direct solution from Cisco to address this common issue. I did ask the community again a couple months ago and here is a link :The idea I thought of trying was to "engineer" a solution that Daniel mentioned to wire the speaker on a inexpensive ph...
