Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i have a customer using CUCME V8 on a 2921.. customer is looking for an attenandt console like applicaton and I am wondering if the cisco smart call connector operator is compatiable with CME
thanks in advance for your help!I have a vgw 2821 with CUBE.. version 15isp = itsp for WAN and a sip trunkusing sip-ua to register sip numbers.. using 729using sip dial-peers back to call managerssip trunk from call manager(version 7) to vgwissue:whe...
I have a smiliar problem on CUCM 7.15 using ITSP with SIP to SIP CUBEOutside callers call into the system and when hitting the transfer button I am able to dial an internal extension but when I hit transfer again the PSTN caller hears a busy signal ...
I have the same issue with ISM-SRE running Unity Express 8.6I used the PAKs to obtain the license files and tried to install from a remote ftp server and also from the router as a tftp server.Any help on this one is highly appreciated.here is the onl...
I had the same problem and I was able to fix it by passing the ip address of the tftp server in clear text formatip dhcp pool phonesoption 66 ascii 10.1.1.2 10.1.1.1
