Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,I recently deployed ISE 2.6 in a dispersed mode, and until now everything runs smoothly.I have a requirement from business about giving access to the LAN to some "unmanaged and exotic" devices like scanners/3d printers, and so on...Most of t...
Hi,I have at the moment an ASA5510 pair in Multiple Context configured. Everything is ok, but we use til now only ACL features.Now I would be interested in configuring 2 contexts, with IPSec VPNs. One VPN per context. But I cannot find any informatio...
Hi,I'm facing random issue on a switch port connected on an 55Mbps Etherconnect line. (layer2 site to site)Here is the topology:SW1 running rapid-pvst SW3 running MST (non Cisco switch) ...
Hi,I'm loosing my mind... I configured a remote IPSec VPN client access on 2 routers 1812. It works like charm.I take the same config and apply it on a 2811, it doesn't work...Error during IPsec phase 2.I re-re-re-re-rechecked the config, it's perfe...
Hi,I have a strange issue concerning the VPN IPSec client.After 19 hours and 14 min (sometime it's around 19hours and 27min), the VPN client is disconnected.It has nothing to do with the station, I've tried it on 4 differents stations / operating sys...
Thanks Surendra,Last question: can I also restrict the access to these portals to only some users or group of users (like based on AD group or local ISE users) ?
Hi Adam,me again... I got an issue buy upgrading stack switches. It seems that the update takes longer as the 40min timeout set in APIC-EM... bad. Anyway I currently create rules for standalone switches, and I wanted to manually update one of the ru...
well you know what ? forget the question about CCP... I will simply buy future routers without it I found in the ordering SKUs the line I have to change to get a brand new Cisco router without this piece of (crap) software on it Last but not least: ...
OK I wrote a list_images.py based on your list_files.py script, and adapt the create_rules.py to send this parameter with. I tested with a C2960X switch and works perfectly.Now I face an issue with a C2921 router. This bloody device has CCP installe...
