Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to configure my ASA 5520 for my home network environment. Cox is my ISP and have their provided router. My plan is to turn on bridge mode and turn that into a modem. I did a test and I was able to ping from the ASA to the outside, howe...
I just setup up AnyConnect on my ASA, when I type the WAN IP address on my remote PC, it does not connect. I review the logs on the ASA and I can see where it is denied by the ACL. What in my config is wrong or preventing me from access the AnyConne...
I need some help, I have my web server on my DMZ interface, but that it doesn't have access to the internet. Unable to the get a ping from inside to the DMZ. Not sure what I am missing, my goal is to have access to the internet from the DMZ and my i...
I need help configuring my ASA 5510 so the my VPN pool of 192.168.3.0/27 has access to the home network of 192.168.1.0/24 I created an inside VPN for testing but also have an tunnel for the outside interface using the same pool.
Using version 8.0(4...
I just setup a Cisco Air 1142 in autonomous mode. Seems to be working just fine, but if I try to join the 5Ghz WiFi is does not give out an IP address. 2.4Ghz is working as it should. Below is the current config, any advise would be greatly apprecia...
Thanks, I will try that today. Also, what is the proper coding line for post 8.4? I don't know why it shows my software version as 8.0.4, I updated the IOS and my ASDM show 9.0.
I needed the https:// with my WAN IP.. it works. But if anyone would like to review my setting and provide feedback on if it looks "OK" or not, I would greatly appreciate it.
How would I redirect so if I access via the VPN from the outside I can access my server via my IP and port 8443?
Sorry, still newish to this. Thanks for your help.
Instead of outside access, because I want this secure. My VPN subnet should have access to the DMZ correct?
When I try to connect via my iPhone with a VPN connection, the page/server fails to load.
I get this error when applying the HTTPS
ERROR: NAT unable to reserve ports.
Current config attached
Unable to access from outside of network (tested with iPhone on LTE, no WiFi)
