Hi All , We are planning to go with 8.4.2 version on nexus 7010 with cold reboot from 6.2.20 and would like to know why N7K-SUP2E is not mentioned under supported hardware as we are seeing only SUP2 Module .Table 3 Supported Modules with the FPGA in ...

Hi All , What is the purpose of address-family ipv4 under BGP and also under neighbor on nexus 7k. If You i remove address-family ipv4 from bgp then what kind of impact would be there . example nexus 7k switch router bgp 10router-id x.x.x.xaddress-fa...

Hi All , We have 2 Links between Data center A and Data center B for data traffic ( both links carries traffic ) and 6 SAN links , aggregated using LACP  for backup traffic . sepearte BGP instances are running between data centers for Data and SAN li...

Hi All , We have pair of 5020 ( VPC )  which will be refreshed with 5596 UP switches.We have 6 x Fexes which are connected to 5020 in dual homed manner. My question is when we are moving uplinks of Fex from 5020 to 5596 switches , what kind of precau...