Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hoping someone can point me to a resource... We have a Cisco c1111-4plteea with GPS enabled, but it is flooding the server with coordinates, reporting over 200 times per minute.. Is there a way to throttle or control how often the coordinates are se...
I can't seem to get the GPS service to work on our C819G-4G-A-K9.
I can get the unit to display up to 5 Satellites with their respective elevation and aziuth, but SNR is always 0, and the GPS state always lists "GPS acquiring".
I've tried many dif...
Hi Dan.. I have a similiar regexp I'm working on, that I would think should be easy.
I am able to extract the IP I want, but I just want the last two octets of that IP..
ie.. 107.84.30.1, I just want the 30.1 portion, octets 3 & 4
Any chance this ...
I'm back to trying to control the GPS stream on a c1111-4plteea. I can't seem to control how often the GPS data is sent.. The router does send it automatically without the script, but over 200x's per second to the server... way too much data.. Anyon...
I have no way to find my way back to this forum, except for this email....We found out that if you have SMS archive configured on the Cisco 819, that was causing the crash.C819G-LTE-MNA-K9Also we needed a IOS upgrade since the IOS c800-universalk9-mz...
Did anyone figure this one out, as I'm having the same issue...
The required syslog message is not showing up, upon receiving a new sms text.
" New SMS received on index .*"
When I was having the issue with no data sending, I found somewhere in the forums to remove one of the lines from the original script. Once I did that, the streaming started to work.. Also, we have an entry to pause from sending a steady stream, I...
