Hi,
I have create a tcl script to put ip in variable.
Exemple
Let say puts ": $ip " displays 10.10.0.0
How can I split this IP to increment only the 3rd octect by 1 to make it 10.10.1.0
What is best way to do this?
Hi,
Can I wait between cli_run cmd in tcl ? Let say I want to shut interface wait 120 then no shut.
I can do it in eem applet not sure how to do it in tcl?
Hi all,Anyone know what could be causing these drops in the QFP:They are incrementing sh platform hardware qfp active statistics drop-------------------------------------------------------------------------Global Drop Stats Pa...
Hi all,Do I need to be connected to VSS switch to see if my switch supports dual-active pagp?Should I be able to use this 3750 for dual-active detection?thank you.INFO: Switch Ports Model SW Version SW Image ---...
If you enable the strong password protection Type-6 passwords., you will not receive the warning. Excellent info from Peter Paluch as always here: https://community.cisco.com/t5/switching/3850-fuji-16-9-code-tacacs-configuration/td-p/3831896
Both switch in the VSS cluster will need to be reloaded.
Here is a link to the ISSU compatibility matrix
http://docwiki.cisco.com/wiki/Catalyst_4500/4900_series_ISSU_compatibility_matrix
As long as I have same software on switch in same stack I should be good
thank you
Here all switch have same licence but IOS XE lower then 3.7 does not display the -E
SWITCH A#sh license right-to-use Slot# License name Type Count Period l...
All my 3650 are using IPServices for licencing. I notice ios xe 3.7.x displays WS-C3650-24TS-E but switches with ios xe 3.6 and lower are displaying WS-C3650-24TS.
I will enable " software auto-upgrade enable " prior to adding the stack kit
Thanks