Hello:
I'm trying to purchase two CBS 350 switches to upgrade two old SG550X in a network environment enterely based on Cisco SG and CBS switches. I was told by reseller that CBS 350 was in EOS and EOL and they offered me two Catalyst switches as an ...
I've been trying to setup a WiFi network since a few days ago. I posted several messages in the community previously but I come to a point 'm totalyy blocked. I have tried to open a support case with Cisco, but although the Smarnets we're bought with...
Hello: When you're adding APs to a initial Mobility Express AP, which has been configured as the controller, the other APs are going to work in mobility-express mode or in capwap mode (command ap-type)? Thanks.
After getting to work our first AP with ME acting a primary WLC we're not able to add more APs. The APs boot, get an IP address and contatc the virtual controller in the first AP. Then they automatically update their software image to make it pair wi...
Helo:I have just installed a new 1542i AP. Is the first one AP in this installation. It comes with CapWAP so I changed it to ME image. I made the ME configuracion through console. Now the AP is running fine, and the WiFi too. I can connect using the ...
Hola Óscar. Siguiendo una sugerencia que me han dado en foros he conseguido que los AP se añadan. Para ello he tenido que manualmente pasarlos del modo Flex al modo local. De todas formas muchas gracias por tu ayuda de ayer.Saludos.
Hi rrdudling: Change the APs mode to local made the trick!!Thanks a lot. You save me Note to Cisco: all mobility express videos shows a two minutes installation procees without any kind of manual intervention. I don 't understand why I need to do al...
Hello. Thanks for answering.WLC AP is a 1815i. APs Í'm tryind to add are 1542i (there will be also some other 1815i)Don't know exactly WhatsApp Mesh neand. I want all of them beign controles by the WLC controle as if it worl be a physical one WLAN co...