Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm seeing a potential problem with the current ACE design, which is configured as one-arm.What I’ve discovered is that the standby ACE show hit counts with the service policy as well as connections. According to what I understand, to maintain state ...
Installed the Latest version of CCP. Noticed that it use Internet Explorer as the default browser. Current issue - Monitor - Traffic Status - Application traffic view show a window that is to large for my current screen,I've tried several options to ...
Hi,Struggle to find the SNMP MIBS of the Nexus 5000 FEX tranceiversExample below:The following show commands display the serial numbers and part numbers of the FEX transceivers switch# show interface transceiver fex-fabric Ethernet1/5 sfp is prese...
Usually check the interface status last been used by looking at the uptime of the switch first and then see when the last time the interface been access by doing the followingShow int f2/7I then look the Last input and output values to verify when th...
Hi Plinio,I will love to see what you've developed here. I'm having a smiliar challenge to ensure that MySQL is available not only on a TCP port level before sending connection attempts.RegardsPhilip
Interesting observation that I want to add.The standby ACE, when it is in FSM_FT_STATE_STANDBY_HOT mode, show that the probes are failing, service-policy state is out of service and no curr or hit counts.But, when in FSM_FT_STATE_STANDBY_COLD, the pr...
I've looked at it, but it seems that it only provide the following informationMIBDescriptionCISCO-ENTITY-EXT-MIBExtends the entityPhysicalTable for modules with processors. For each of these modules, this MIB provides memory statistics and LED in...
