Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Any help with this issue would be greatly appreciated.ip address 172.15.45.2 255.255.255.0ip nat insideip virtual-reassembly induplex autospeed auto!interface GigabitEthernet0/1ip address 172.15.45.1 255.255.255.248ip nat insideip virtual-reassembly ...
I have port channel created on a vss upstream switches with 2 ports bundled together and I have port_profile created on 1000v with channel group configured on port profile but won't come up.sample config port-profile type ethernet vm-traffic-uplink...
When you have vpn Anyconect running on pc. What parameter needs to be configured on ASA in order to connect to the network? I have tried everything but don't work. I only get to login screen .
Do I have to open port on firewall in order to use vpn client3.x or 4.x to connect to outside network. How do I configure my ASA to allow port TCP 10000 or udp 500 opened. Clarification: my user inside network unable to connect to outside network ...
Yes Yes but change the bootvar as u cab see below. boot-start-markerboot system flash cat4500es8-universalk9.SPA.03.03.00.XO.151-1.XO.binboot-end-marker
