Does anyone have a config for the ATA186 and Call Manager using MGCP? I've tried Cisco's website but to no avail. I'm about to give up and go back to H.323. Any reason why I should pick H.323 over MGCP?
you can use them over both. I use a GRE tunnel from my house to my office to pass my VoIP traffic, whereas I pass my other data traffic through an IPSEC AES tunnel. The GRE tunnel has MUCH LESS overhead/latency than the IPSEC tunnel.-bradwww.ccbootca...
Do you have an external USB sound device you can hook up? If so, try that and disable the internal sound card drivers (to see if it's the sound card that is locking it up).
No, you shouldnt need to do that. The proceedure is here:http://www.cisco.com/en/US/products/sw/secursw/ps5338/products_installation_guide_chapter09186a008070c61b.html#wp1057928Test your ftp server with an ftp client on a workstation to verify that y...
Have you tried running a constant ping from the device to the ACS server? Is there something that is dropping packets along the path (ie from congestion or something)? What version of ACS are you running?