Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have two 1200AP's set up and am trying to get one working as a repeater for the other. We are doing EAP-TLS authentication for our network, but for the repeater to authenticate I enabled LEAP on the ACS server. I added a user on the ACS for the rep...
I have set up a couple Cisco 1300s to bridge out LAN between a couple buildings and am wondering something. We're getting decent 802.11G throughput (about 22mbps) but looking at the receiving end of a large file transfer, we are getting quite a few h...
As of now:RTS retries: 22CTS not received: 304RTS Transmitted: 1238Normal? Copying across the connection, we were getting about 200KB/sec (says its connected at 802.11G) What kind of actual throughput can you expect out of the 54mbps peak of 802.11G?
One thing I've had problems with before is if you have the two Cisco specific WEP encryption options turned on (Enable Per Packet Keying, and MIC). When I have those turned on I havent been able to associate or authenticate when using a couple of non...
