Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
llo! We're facing some issues regarding Port Security with Max-Addresses on a SG550X stack with 3 switches. #sh verActive-image: flash://system/images/cbs350_2.5.7.85.binVersion: 2.5.7.85MD5 Digest: e766e20b0d080a72db3ec00888d595a0Date: 18-Jan-2021Ti...
Hi All! We got a problem with discovering a SG350X (stack with 4 switches) for the Cisco Business Dashboard.The FindIT Network Probe is activated on the switch itself. When we start the refresh in inventory it find itself as a device (switch, model, ...
Recently imported a SSL certificate (*.domain.tld) to a SG300 Switch. Worked fine, certificates shows up with the correct name in the SSL Server Key Table (Security - SSL Server - SSL Server Authentication Settings). But when i enter the URL https://...
Hi!
Is it possible to limit the external access to the management IP/Interface to multiple IPs rather than a single one or a whole subnet?
Our company got several external IPs and we want to limit the access of the WAN management (HTTPS) interface ...
Hello!I configured logging via e-mail for messages related to the Cisco ASA botnet filter. It should send syslog messages to the admin when the botnet filter recognizes traffic from infected hosts :logging list e-mail-notification message 338002loggi...
Hello! The problem are not the actual entries in the mac address table but the count of learned mac address in port security. #sh ports security addresses gig 1/0/1Port status Learning Current Maximum------- -------- --------------- ---------- ------...
Hello! Forget to say, in the mac address table we can see only the 1 or 2 devices connected to the port. No other MACs are listed. #show mac address-table interface gig1/0/1Flags: I - Internal usage VLANAging time is 300 secVlan Mac Address Port Type...
Hello David! Yes, it's up:IP Address I/F I/F Status Type Directed Prec Redirect Status10.10.102.21/24 vlan 1 UP/UP Static disable No enable Valid We'll upgrade the firmware to the latest and check the discovery afterwares. Best Regards,Christian
Hello Dave! VLAN 1 on the 14-sw01 was active but had no IP as you saw in the configuration. I added an IP Address to the VLAN and startet the discovery again. Now the Inventory shows the IP of the switch, but it's still not recognised as a 4 switch s...
