Multiple Allowed Remote IP Addresses for Management RV320/340

[Christian Woegerbauer]

Hi!

Is it possible to limit the external access to the management IP/Interface to multiple IPs rather than a single one or a whole subnet?

Our company got several external IPs and we want to limit the access of the WAN management (HTTPS) interface of our customer-routers to these IPs.

I also tried an access rule (WAN1 to WAN1) with an allow rule for https from the concerning external IPs and afterwards a deny rule for any. But this ACL is not even triggerd as i can see from the logs.

Management Access from WAN (Basic Settings: Allowed Remote IP Addresses: Any IP Address) is activated. Firmware of RV340 is 1.0.01.17

Any suggegstions?

Thank you,

Woger

[Iliya Gatsev]

Hi, My name is Iliya Gatsev from Cisco Technical Support Team.

Please open a case with Cisco Technical Support. Here is the contact of the technical support :

https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Iliya Gatsev
Cisco TAC Network Engineer
Together we are the human network .:|:.:|:. CISCO

[Christian Woegerbauer]

Hello Iliya!

I have already opened a case to this issue 2 months ago. You are the engineer working on that ;-)

Any news regarding a new firmware supporting this function?

Thank you and Best Regards,

Christian