Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi,maybe it looks stupied Q , but this my first time with ACS 5.1 server 1120i configure the basic configuration using CLI setup command , then I connect https://10.2.2.7 but it ask me for the username and password , when i put the password i cann't ...
hi,i have one requirment from the customer to force https for web site sections that require authentication all web site sections that require authentication end with login.aspxfor example:www.cisco.com/staff/login/login.aspxwww.cisco.com/empl/login/...
hi,i try to configure HTTP health probe at ACE 4710 , software version A3(2.3) but i found the following :Previous versions: Request method: N/A, GET, HeadIn version A3 (2.3) Request method: GET, Head why they remove N/A option ?please find attache...
i configure remote access on ASA5520 using ASDM wizard , it is working fine with ipsec over tcp but i can't connect with ipsec over udp (NAT/PAT) urgent help needed
thanks for your helpI just noticed that I am getting status code 404 page not found because the web server (IIS) configured to listen to Name only not to ip addressif ip put : www.ccie.com.sa : it is workingif ip put: 192.168.198.1 : it is not work...
the following configuration was working before, but know it is not :probe http app-http port 80 interval 15 faildetect 10 passdetect interval 2 passdetect count 1 expect status 200 201 open 10can you please tell how to configure http health pr...
actually , the ACE decrease its priority from 120 to 70 because he couldn't ping the pix interface but when the ping is return back he didn't increase the priority from 70 to 120 again and he didn't take over again ****************************how is ...
