Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am having a problem getting a dhcp address on a 3550 interface from a Cable Modem provider. It seems they statically map the Mac Address. I need to change the Mac Address associated with the interface to the Mac they have statically set. Can thi...
I am looking for information on how resources are selected in CM. Here are my questions:If I am not using Media Resource Groups(MRG), and I have a Software Conference Bridge, and a Hardware Conference Bridge, which resource gets used first? I had s...
I am working on a simple CSS design using Active/Backup with VIP and interface redundancy. My servers are dual homed to the Active and Backup CSS's using teaming. I am sure this has been done before, but I have not found any documentation on how th...
Has anyone implemented a centralized architecture in a dispersed environment, i.e. over a Trans-Atlantic DS3. I know Cisco has a minimum requirement of a 10MB link for connections between Call Manager's in a single cluster. Any known issues, or pro...
Thanks for the reference. If ahyone is still reading this thread, I have some further information. In reading through the IPT Design Guide, I found the following information:--------------------------------------------------------------------------...
So I guess I will answer my own question, seeing that I have not got any response. Hopefully this will help some other poor sap out there that has the same question from going nuts trying to find info on Conference Connection. It seems that 1.1 CCC ...
You may be able to do this with a 2003-A, I have not used it. I have worked extensively with the Valcom product line, and have implemented close to what you are looking to do. If you want to provide a paging sytem integration, you should use the Val...
My issue is that the customer is trying to keep the cost down. There is only a single link to the site. The routers already exist, so not much cost there. Will SRST work with HSRP in tandem, that is the question. Will the current Active router ru...
If HSRP and SRST is not possible, would it be possible to run the backup switch with Ip Telephony Services (IP Keyswitch) as a backup solution? In the case of a failure of the primary SRST router, the backup router could be brought online to run as ...
