We have a Catalyst 3524-XL-EN switch whose RPS light is amber. The docs state that amber means:RPS is connected but not functioning properly. One of the power supplies in the RPS could be powered down, or a fan on the RPS could have failed.But, we d...

We recently installed a WS-C3750-48TS-E and loaded the newest Enterprise IOS image on it.There are a few trunks configured on the switch and there are also about 10 servers connected to it. We periodically get flashing amber lights on only the serve...

Is the Catalyst 6000 Supervisor IOS affected by the recently discovered vulerability outlined in the following document?http://www.cisco.com/warp/public/707/cisco-sa-20030717-blocked.shtml I noticed that in the main IOS download area, the vulnerable ...

We have a PIX 515E UR firewall in place on our network. We're trying to configure the VPN feature. I can connect to the PIX fine using the 3.6.4 VPN client, but once I'm connected, I cannot ping anything except for the (PIX) VPN endpoint address. ...

We have a Catalyst 6506 with MSFC/PFC. FE 2/1 on the Cat 6506 is a routed (L3) interface used as an uplink to one of our routers. Will applying the following to FastEthernet 2/1 have the desired effect of limiting the output rate on the FE 2/1 inte...