Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
There is a voice hunt-group for internal support, for example:voice hunt-group 52 parallel final 6000 list 1711,1744,1798,1793,1712,1733,1780,1713,1755 timeout 20 pilot 1111 When someone calls 1111 for tech support, all phones of tech support are ri...
Hi Guys,Could you tell me if I can do destination NAT (class C network => class C network) on Cisco ASA running 8.2? (or another version).For example, will destination NAT like this work:static (inside,outside) 8.2.2.0 10.10.8.0 netmask 255.255.255.0...
Hi guys,I have CME 7.1. It has two hunt groups. One HG has one phone only and forward calls to second HG which has three phones.Task is to make second's HG all phones to ring at the same time when a call is coming.Quick diagram.[PSTN] call goes to Of...
Hi guys,I found out that ASA (8.2 in particular) generates the same password hash for the same password every time.So, if I enter the same password on the different ASAs the password hash will be the same. And if you decrypt one of them you will know...
Hi guys,My question is connected with IPv6 routing and ASA.My simple lab network topology:PC======ASA 5520=======Router 2801I've assigned following IPv6 Subnets:PC-ASA:Network is 2001::3000:100:/104ASA has 2001::3000:101:1/104PC has 2001::3000:133:13...
All I knew from working with IPv6 that don't use less than /64 for hosts even it works sometimes.RFCs about IPv6 say the same.Anyway, thanks for your post.
My problem was the wrong IPv6 allocation.Be sure that you don't use IPv6 subnetworks with prefixes lower than /64. I tried to use /104. IPv6 was designerd for using at least /64 subnet mask. Many hardware network was designed to do such.Even for poin...
