Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
i need a little help in connecting 3 sitessite A 10.x.x.x networkssite B 192.168.x.x networkssite C 192.168.x.x networkswe also need to connect over the internetsite A has around 30 devices that will send data to a server at site Bsite B has a serv...
not sure if this is the correct forum for this.I have a network with a number of devices that will be accessed by a server that is hosted by a external company.the external company wil then use data from this server to create content on their own web...
Hi guysi have an OSPF ring of around 10 c3560'sthe exit from the ring to the WAN is via 2 c3560's using HSRP.my concern is that if i understand HSRP correctly one router acts as main and the other as standby. If the main fails then the standby takes ...
does anyone know why i am unable to change the contrast on my 7971/7975 phonesall other settings work OK but contrast setting is dimmed and not accessible
my plan is as followsstick our server at the remote site site on THEIR network.then get them to allocate 16 IP addresses for the kit on OUR networkthen create the vpn and use static NAT at my end to convert from their IP addresses to our IP addresse...
as anticipated this did not worki did a test with 7 routers R0->R7R1->R6 form a ring with R1 at the start and R6 at the end, R1 and R6 are both connected to R0 and R1 and R6 run HSRPall works fine unless you break the ring in the middle and then HSRP...
what makes think it wont wokr is that under normal condition any datafor the networks on the ring are forwarded to the Virtual IP Address of the 2 HSRP routers.If one of these fails then HSRP switches to the other the OSPF in the ring takes care of t...
